mql5/Profiles/Tester/ERMT_PME_2.1_M5.set

Name: MQL5 Algo Forge
Brand: MQL5
<EFBFBD><EFBFBD>; saved automatically on 2026.03.16 11:56:34
; this file contains last used input parameters for testing/optimizing ERMT_PME_2.1_M5 expert advisor
;
; === Management Control ===
InpInstanceID=PME2
InpManageAllPositions=true||false||0||true||N
InpMagicFilter=0||0||1||10||N
InpDefaultMode=3||0||0||4||N
InpStartLevel=1||0||0||3||N
; === Entry Mode (Backtesting) ===
InpEnableEntries=true||false||0||true||N
InpEntryMagic=77777||77777||1||777770||N
InpEntryRiskPercent=2.0||1.0||0.100000||10.000000||N
InpEntryLots=0.0||0.0||0.000000||0.000000||N
InpStopLossPoints=300||300||100||1000||N
InpTakeProfitRR=1.5||3.0||0.300000||30.000000||N
InpMinBarsBetweenEntries=24||10||1||100||N
; === Risk Protection ===
InpMaxLossPerTrade=3.0||3.0||0.300000||30.000000||N
InpMaxDailyLoss=10.0||10.0||1.000000||100.000000||N
InpMaxDrawdown=25.0||25.0||2.500000||250.000000||N
InpMaxCorrelation=0.8||0.8||0.080000||8.000000||N
; === Emergency Protection ===
InpApplyEmergencyStops=false||false||0||true||N
InpEmergencySLMultiplier=7||2.5||0.250000||25.000000||N
InpEmergencyTPMultiplier=4.0||4.0||0.400000||40.000000||N
; === Stop Loss Management ===
InpDynamicStops=false||false||0||true||N
InpTightenOnProfit=true||false||0||true||N
InpTightenThreshold=50.0||50.0||5.000000||500.000000||N
InpProtectProfits=true||false||0||true||N
; === Breakeven Settings ===
InpBreakevenEnabled=false||false||0||true||N
InpBreakevenTrigger=150||30.0||3.000000||300.000000||N
InpBreakevenOffset=50||5.0||0.500000||50.000000||N
InpMultiLevelBE=false||false||0||true||N
; === Trailing Stop ===
InpTrailingMethod=0||0||0||8||N
InpTrailStart=50.0||50.0||5.000000||500.000000||N
InpTrailDistance=30.0||30.0||3.000000||300.000000||N
InpTrailStep=10.0||10.0||1.000000||100.000000||N
InpAdaptiveTrailing=true||false||0||true||N
; === Partial Close ===
InpPartialEnabled=false||false||0||true||N
InpPartialTrigger1=50.0||50.0||5.000000||500.000000||N
InpPartialPercent1=30.0||30.0||3.000000||300.000000||N
InpPartialTrigger2=100.0||100.0||10.000000||1000.000000||N
InpPartialPercent2=25.0||25.0||2.500000||250.000000||N
; === Exit Management ===
InpUseTechnicalExits=false||false||0||true||N
InpTimeBasedExits=false||false||0||true||N
InpMaxBarsInTrade=500||500||1||5000||N
InpReduceRiskOverTime=false||false||0||true||N
; === Time Filters ===
InpUseTimeFilter=false||false||0||true||N
InpStartHour=8||8||1||80||N
InpEndHour=20||20||1||200||N
InpFridayClose=true||false||0||true||N
InpFridayCloseHour=21||21||1||210||N
; === Display Settings ===
InpShowDashboard=true||false||0||true||N
InpDashboardX=20||20||1||200||N
InpDashboardY=50||50||1||500||N
InpUpdateFrequency=2||2||1||20||N
; === System Settings ===
InpLogLevel=3||0||0||5||N
InpSaveReports=true||false||0||true||N
InpEmailAlerts=false||false||0||true||N
InpPushAlerts=false||false||0||true||N
InpSoundAlerts=true||false||0||true||N
; === M5 Bar Counting Mode ===
InpEnableM5Mode=true||false||0||true||N
InpM5Partial1=35.0||35.0||3.500000||350.000000||N
InpM5Partial2=60.0||60.0||6.000000||600.000000||N
InpM5Partial3=100.0||100.0||10.000000||1000.000000||N
InpM5Partial4=150.0||150.0||15.000000||1500.000000||N
InpM5Phase1=60||60||1||600||N
InpM5Phase2=180||180||1||1800||N
InpM5MaxBars=300||300||1||3000||N
InpM5DisasterTrigger=100.0||100.0||100||1000.000000||N
InpM5DisasterDistance=150.0||150.0||100||1000||N
InpBarCountEntry=7||3||0||0||N
; === Graduated Stop-Loss (v2.1) ===
InpUseGraduatedStops=true||false||0||true||N
InpInitialStopATR=3.5||7||0.5||10||Y
InpPhase1StopATR=2.5||5||0.250000||7||Y
InpPhase2StopATR=2.0||3||0.25||5||Y
InpMatureStopATR=1.5||1.5||0.25||3||Y
; === Delayed Breakeven (v2.1) ===
InpUseDelayedBreakeven=true||false||0||true||N
InpMinBarsBeforeBE=20||20||1||200||N
InpMinProfitBarsForBE=5||5||1||50||N
InpRequireProfitStability=true||false||0||true||N
; === Delayed Trailing (v2.1) ===
InpUseDelayedTrailing=false||false||0||true||N
InpMinBarsBeforeTrail=40||40||1||400||N
InpTrailMinProfit=60.0||60.0||6.000000||600.000000||N
; === Reversal Speed Tracking (v2.1) ===
InpShowReversalMetrics=true||false||0||true||N
InpAdjustForReversalSpeed=true||false||0||true||N
InpFastReversalBars=12||12||1||120||N
InpSlowReversalBars=60||60||1||600||N
-												chore: save 2.1 optimisation session state and snapshot (2026-03-23)

- Add PME snapshot CSV for 23 Mar 2026
- Update tester profile and backtest config for ERMT PME 2.1 M5
- Clean up stale chart profiles and old logs
- Update VS Code workspace settings

											
										
										
											2026-03-23 12:58:33 +00:00
+								<EFBFBD><EFBFBD>; saved automatically on 2026.03.16 11:56:34
-												feat(M5): Implement v2.1 config enforcement and graduated stops in M5 contrarian mode

BREAKING CHANGES:
- M5 mode now enforces all v2.1 delayed BE/trailing parameters
- Graduated stop system replaces legacy disaster stop when enabled
- Max bars limit now triggers hard position close

Changes to PositionManager_PME_Complete.mqh:

1. Max Bars Hard Close Enforcement
   - Added check for m_m5_config.max_bars at start of ApplyM5ContrarianManagement()
   - Forces EXIT_TIME close when position age exceeds configured limit (300 bars)
   - Prevents indefinite position holding in extended phases

2. Graduated Stop-Loss System
   - Implements ATR-based phase-progressive stops:
     * Phase 1 (0-60 bars): 3.5 ATR wide initial protection
     * Phase 2 (60-180 bars): 2.5 ATR tightened stop
     * Phase 3 (180+ bars): 2.0 ATR mature stop
   - Replaces legacy disaster stop when m_config.use_graduated_stops enabled
   - Falls back to disaster stop (150pt @ -100pt) if graduated stops disabled
   - Updates m_positions[].current_sl after successful modification

3. Delayed Breakeven Enforcement (v2.1)
   - Respects m_config.breakeven_min_bars (20 bars minimum age)
   - Respects m_config.breakeven_min_profit_bars (5 consecutive profit bars)
   - Applied to both Phase 1 fast BE (25pts) and Phase 2 maturity BE (30pts)
   - Logs bar count and consecutive profit bars on activation

4. Delayed Trailing Enforcement (v2.1)
   - Respects m_config.trail_min_bars (40 bars minimum age)
   - Applied to percentage trail in Phase 2 (30%/40% based on reversal speed)
   - Sets trail_activated flag and increments m_metrics.trails_activated
   - Logs activation with percentage and bar count

5. M5 Trailing Helper Metric Sync
   - Created ApplyM5PercentageTrail() with current_sl sync
   - Created ApplyM5PointsTrail() with current_sl sync
   - Created ApplyM5DynamicTrail() with current_sl sync
   - Standard helpers (ApplyPercentageTrail, etc.) preserved for non-M5 use
   - M5 contrarian management now calls M5-specific versions exclusively
   - Fixes metric/state desync between MT5 server and in-memory position tracking

Architecture:
- M5 mode continues to bypass standard management path (intentional isolation)
- Standard trailing/technical/time-exit engines remain unused in M5 mode
- Configuration separation maintained: ManagementConfig for standard + v2.1 fields, M5Config for contrarian-specific
- No changes to main EA file (ERMT_PME_2.1_M5.mq5)

Compatibility:
- No breaking changes to standard (non-M5) management path
- Existing M5 backtest results remain valid (behavior refinement only)
- All v2.1 configuration fields now honored in M5 runtime

											
										
										
											2026-03-02 17:08:42 +00:00
+								; this file contains last used input parameters for testing/optimizing ERMT_PME_2.1_M5 expert advisor
 								;
 								; === Management Control ===
 								InpInstanceID=PME2
 								InpManageAllPositions=true||false||0||true||N
 								InpMagicFilter=0||0||1||10||N
 								InpDefaultMode=3||0||0||4||N
 								InpStartLevel=1||0||0||3||N
 								; === Entry Mode (Backtesting) ===
 								InpEnableEntries=true||false||0||true||N
 								InpEntryMagic=77777||77777||1||777770||N
 								InpEntryRiskPercent=2.0||1.0||0.100000||10.000000||N
 								InpEntryLots=0.0||0.0||0.000000||0.000000||N
-												fix(M5): Add stop level validation to prevent infinite BE retry loops

CRITICAL FIX:
- MoveToBreakeven() now validates against broker stop level before modification
- Prevents "Invalid stops" error causing infinite retry spam
- Marks breakeven_applied=true even on failed modify to stop retries

RELATED FIXES:
- Disabled analyzer cleanup in OnDeinit to prevent error 506 pointer access crash
- Analyzer GenerateAnalysisReport() file I/O unsafe during shutdown
- TODO: Refactor analyzer report generation to be shutdown-safe

Changes to PositionManager_PME_Complete.mqh:
- Lines 854-876: Added ValidateStopLoss() check in MoveToBreakeven()
- Failsafe: Mark BE attempted even if modify fails post-validation
- Prevents tick-spam when BE trigger met but SL too close to market price

Changes to ERMT_PME_2.1_M5.mq5:
- Lines 893-906: Commented out g_analyzer cleanup block in OnDeinit()
- Temporary disable pending shutdown-safe refactor

Testing:
- Before: "failed modify #7... [Invalid stops]" spam, backtest hangs
- After: Clean execution, BE either succeeds or silently skips
- Parametric optimization now completes successfully

Dependencies: Requires M5 v2.1 changes from previous commit

											
										
										
											2026-03-03 11:16:01 +00:00
+								InpStopLossPoints=300||300||100||1000||N
-												chore: save 2.1 optimisation session state and snapshot (2026-03-23)

- Add PME snapshot CSV for 23 Mar 2026
- Update tester profile and backtest config for ERMT PME 2.1 M5
- Clean up stale chart profiles and old logs
- Update VS Code workspace settings

											
										
										
											2026-03-23 12:58:33 +00:00
+								InpTakeProfitRR=1.5||3.0||0.300000||30.000000||N
 								InpMinBarsBetweenEntries=24||10||1||100||N
-												feat(M5): Implement v2.1 config enforcement and graduated stops in M5 contrarian mode

BREAKING CHANGES:
- M5 mode now enforces all v2.1 delayed BE/trailing parameters
- Graduated stop system replaces legacy disaster stop when enabled
- Max bars limit now triggers hard position close

Changes to PositionManager_PME_Complete.mqh:

1. Max Bars Hard Close Enforcement
   - Added check for m_m5_config.max_bars at start of ApplyM5ContrarianManagement()
   - Forces EXIT_TIME close when position age exceeds configured limit (300 bars)
   - Prevents indefinite position holding in extended phases

2. Graduated Stop-Loss System
   - Implements ATR-based phase-progressive stops:
     * Phase 1 (0-60 bars): 3.5 ATR wide initial protection
     * Phase 2 (60-180 bars): 2.5 ATR tightened stop
     * Phase 3 (180+ bars): 2.0 ATR mature stop
   - Replaces legacy disaster stop when m_config.use_graduated_stops enabled
   - Falls back to disaster stop (150pt @ -100pt) if graduated stops disabled
   - Updates m_positions[].current_sl after successful modification

3. Delayed Breakeven Enforcement (v2.1)
   - Respects m_config.breakeven_min_bars (20 bars minimum age)
   - Respects m_config.breakeven_min_profit_bars (5 consecutive profit bars)
   - Applied to both Phase 1 fast BE (25pts) and Phase 2 maturity BE (30pts)
   - Logs bar count and consecutive profit bars on activation

4. Delayed Trailing Enforcement (v2.1)
   - Respects m_config.trail_min_bars (40 bars minimum age)
   - Applied to percentage trail in Phase 2 (30%/40% based on reversal speed)
   - Sets trail_activated flag and increments m_metrics.trails_activated
   - Logs activation with percentage and bar count

5. M5 Trailing Helper Metric Sync
   - Created ApplyM5PercentageTrail() with current_sl sync
   - Created ApplyM5PointsTrail() with current_sl sync
   - Created ApplyM5DynamicTrail() with current_sl sync
   - Standard helpers (ApplyPercentageTrail, etc.) preserved for non-M5 use
   - M5 contrarian management now calls M5-specific versions exclusively
   - Fixes metric/state desync between MT5 server and in-memory position tracking

Architecture:
- M5 mode continues to bypass standard management path (intentional isolation)
- Standard trailing/technical/time-exit engines remain unused in M5 mode
- Configuration separation maintained: ManagementConfig for standard + v2.1 fields, M5Config for contrarian-specific
- No changes to main EA file (ERMT_PME_2.1_M5.mq5)

Compatibility:
- No breaking changes to standard (non-M5) management path
- Existing M5 backtest results remain valid (behavior refinement only)
- All v2.1 configuration fields now honored in M5 runtime

											
										
										
											2026-03-02 17:08:42 +00:00
+								; === Risk Protection ===
 								InpMaxLossPerTrade=3.0||3.0||0.300000||30.000000||N
 								InpMaxDailyLoss=10.0||10.0||1.000000||100.000000||N
 								InpMaxDrawdown=25.0||25.0||2.500000||250.000000||N
 								InpMaxCorrelation=0.8||0.8||0.080000||8.000000||N
 								; === Emergency Protection ===
 								InpApplyEmergencyStops=false||false||0||true||N
 								InpEmergencySLMultiplier=7||2.5||0.250000||25.000000||N
 								InpEmergencyTPMultiplier=4.0||4.0||0.400000||40.000000||N
 								; === Stop Loss Management ===
 								InpDynamicStops=false||false||0||true||N
 								InpTightenOnProfit=true||false||0||true||N
 								InpTightenThreshold=50.0||50.0||5.000000||500.000000||N
 								InpProtectProfits=true||false||0||true||N
 								; === Breakeven Settings ===
 								InpBreakevenEnabled=false||false||0||true||N
 								InpBreakevenTrigger=150||30.0||3.000000||300.000000||N
 								InpBreakevenOffset=50||5.0||0.500000||50.000000||N
 								InpMultiLevelBE=false||false||0||true||N
 								; === Trailing Stop ===
 								InpTrailingMethod=0||0||0||8||N
 								InpTrailStart=50.0||50.0||5.000000||500.000000||N
 								InpTrailDistance=30.0||30.0||3.000000||300.000000||N
 								InpTrailStep=10.0||10.0||1.000000||100.000000||N
 								InpAdaptiveTrailing=true||false||0||true||N
 								; === Partial Close ===
 								InpPartialEnabled=false||false||0||true||N
 								InpPartialTrigger1=50.0||50.0||5.000000||500.000000||N
 								InpPartialPercent1=30.0||30.0||3.000000||300.000000||N
 								InpPartialTrigger2=100.0||100.0||10.000000||1000.000000||N
 								InpPartialPercent2=25.0||25.0||2.500000||250.000000||N
 								; === Exit Management ===
 								InpUseTechnicalExits=false||false||0||true||N
 								InpTimeBasedExits=false||false||0||true||N
 								InpMaxBarsInTrade=500||500||1||5000||N
 								InpReduceRiskOverTime=false||false||0||true||N
 								; === Time Filters ===
 								InpUseTimeFilter=false||false||0||true||N
 								InpStartHour=8||8||1||80||N
 								InpEndHour=20||20||1||200||N
 								InpFridayClose=true||false||0||true||N
 								InpFridayCloseHour=21||21||1||210||N
 								; === Display Settings ===
 								InpShowDashboard=true||false||0||true||N
 								InpDashboardX=20||20||1||200||N
 								InpDashboardY=50||50||1||500||N
 								InpUpdateFrequency=2||2||1||20||N
 								; === System Settings ===
 								InpLogLevel=3||0||0||5||N
 								InpSaveReports=true||false||0||true||N
 								InpEmailAlerts=false||false||0||true||N
 								InpPushAlerts=false||false||0||true||N
 								InpSoundAlerts=true||false||0||true||N
 								; === M5 Bar Counting Mode ===
 								InpEnableM5Mode=true||false||0||true||N
 								InpM5Partial1=35.0||35.0||3.500000||350.000000||N
 								InpM5Partial2=60.0||60.0||6.000000||600.000000||N
 								InpM5Partial3=100.0||100.0||10.000000||1000.000000||N
 								InpM5Partial4=150.0||150.0||15.000000||1500.000000||N
 								InpM5Phase1=60||60||1||600||N
 								InpM5Phase2=180||180||1||1800||N
 								InpM5MaxBars=300||300||1||3000||N
 								InpM5DisasterTrigger=100.0||100.0||100||1000.000000||N
 								InpM5DisasterDistance=150.0||150.0||100||1000||N
-												chore: save 2.1 optimisation session state and snapshot (2026-03-23)

- Add PME snapshot CSV for 23 Mar 2026
- Update tester profile and backtest config for ERMT PME 2.1 M5
- Clean up stale chart profiles and old logs
- Update VS Code workspace settings

											
										
										
											2026-03-23 12:58:33 +00:00
+								InpBarCountEntry=7||3||0||0||N
-												feat(M5): Implement v2.1 config enforcement and graduated stops in M5 contrarian mode

BREAKING CHANGES:
- M5 mode now enforces all v2.1 delayed BE/trailing parameters
- Graduated stop system replaces legacy disaster stop when enabled
- Max bars limit now triggers hard position close

Changes to PositionManager_PME_Complete.mqh:

1. Max Bars Hard Close Enforcement
   - Added check for m_m5_config.max_bars at start of ApplyM5ContrarianManagement()
   - Forces EXIT_TIME close when position age exceeds configured limit (300 bars)
   - Prevents indefinite position holding in extended phases

2. Graduated Stop-Loss System
   - Implements ATR-based phase-progressive stops:
     * Phase 1 (0-60 bars): 3.5 ATR wide initial protection
     * Phase 2 (60-180 bars): 2.5 ATR tightened stop
     * Phase 3 (180+ bars): 2.0 ATR mature stop
   - Replaces legacy disaster stop when m_config.use_graduated_stops enabled
   - Falls back to disaster stop (150pt @ -100pt) if graduated stops disabled
   - Updates m_positions[].current_sl after successful modification

3. Delayed Breakeven Enforcement (v2.1)
   - Respects m_config.breakeven_min_bars (20 bars minimum age)
   - Respects m_config.breakeven_min_profit_bars (5 consecutive profit bars)
   - Applied to both Phase 1 fast BE (25pts) and Phase 2 maturity BE (30pts)
   - Logs bar count and consecutive profit bars on activation

4. Delayed Trailing Enforcement (v2.1)
   - Respects m_config.trail_min_bars (40 bars minimum age)
   - Applied to percentage trail in Phase 2 (30%/40% based on reversal speed)
   - Sets trail_activated flag and increments m_metrics.trails_activated
   - Logs activation with percentage and bar count

5. M5 Trailing Helper Metric Sync
   - Created ApplyM5PercentageTrail() with current_sl sync
   - Created ApplyM5PointsTrail() with current_sl sync
   - Created ApplyM5DynamicTrail() with current_sl sync
   - Standard helpers (ApplyPercentageTrail, etc.) preserved for non-M5 use
   - M5 contrarian management now calls M5-specific versions exclusively
   - Fixes metric/state desync between MT5 server and in-memory position tracking

Architecture:
- M5 mode continues to bypass standard management path (intentional isolation)
- Standard trailing/technical/time-exit engines remain unused in M5 mode
- Configuration separation maintained: ManagementConfig for standard + v2.1 fields, M5Config for contrarian-specific
- No changes to main EA file (ERMT_PME_2.1_M5.mq5)

Compatibility:
- No breaking changes to standard (non-M5) management path
- Existing M5 backtest results remain valid (behavior refinement only)
- All v2.1 configuration fields now honored in M5 runtime

											
										
										
											2026-03-02 17:08:42 +00:00
+								; === Graduated Stop-Loss (v2.1) ===
 								InpUseGraduatedStops=true||false||0||true||N
-												fix: resolve M5 parameter conflicts and align config with user inputs

CHANGES:
- InitializeM5BarCountingMode(): Replace hardcoded boolean overrides with
  input-driven values (InpBreakevenEnabled, InpPartialEnabled,
  InpTrailingMethod, InpTrailDistance, InpTrailStep, InpAdaptiveTrailing)
- ConfigureContrarianMode(): Update preset to respect global inputs instead
  of hardcoded values
- ApplyM5ContrarianManagement() - Phase 1: Add m_config.breakeven_enabled
  check before executing BE
- ApplyM5ContrarianManagement() - Phase 2: Add m_config.breakeven_enabled
  check and wrap partials in if(m_config.partial_enabled) block
- Remove undeclared config.use_technical_exits field reference

BEHAVIOR:
- M5 mode now respects global enable/disable flags set in EA inputs
- Delayed breakeven and trailing delays preserved (InpMinBarsBeforeBE,
  InpMinBarsBeforeTrail remain M5-specific)
- Graduated stop-loss (3.5→2.5→2.0 ATR) and phase-based management unchanged
- Test reports now accurately reflect enabled/disabled features

FIXES:
- Configuration now matches tester report flags
- User can disable BE or partials in M5 mode via global inputs
- Prevents undefined behavior from conflicting hardcoded vs input values

											
										
										
											2026-03-04 16:04:16 +00:00
+								InpInitialStopATR=3.5||7||0.5||10||Y
-												chore: save 2.1 optimisation session state and snapshot (2026-03-23)

- Add PME snapshot CSV for 23 Mar 2026
- Update tester profile and backtest config for ERMT PME 2.1 M5
- Clean up stale chart profiles and old logs
- Update VS Code workspace settings

											
										
										
											2026-03-23 12:58:33 +00:00
+								InpPhase1StopATR=2.5||5||0.250000||7||Y
 								InpPhase2StopATR=2.0||3||0.25||5||Y
-												fix(M5): Add stop level validation to prevent infinite BE retry loops

CRITICAL FIX:
- MoveToBreakeven() now validates against broker stop level before modification
- Prevents "Invalid stops" error causing infinite retry spam
- Marks breakeven_applied=true even on failed modify to stop retries

RELATED FIXES:
- Disabled analyzer cleanup in OnDeinit to prevent error 506 pointer access crash
- Analyzer GenerateAnalysisReport() file I/O unsafe during shutdown
- TODO: Refactor analyzer report generation to be shutdown-safe

Changes to PositionManager_PME_Complete.mqh:
- Lines 854-876: Added ValidateStopLoss() check in MoveToBreakeven()
- Failsafe: Mark BE attempted even if modify fails post-validation
- Prevents tick-spam when BE trigger met but SL too close to market price

Changes to ERMT_PME_2.1_M5.mq5:
- Lines 893-906: Commented out g_analyzer cleanup block in OnDeinit()
- Temporary disable pending shutdown-safe refactor

Testing:
- Before: "failed modify #7... [Invalid stops]" spam, backtest hangs
- After: Clean execution, BE either succeeds or silently skips
- Parametric optimization now completes successfully

Dependencies: Requires M5 v2.1 changes from previous commit

											
										
										
											2026-03-03 11:16:01 +00:00
+								InpMatureStopATR=1.5||1.5||0.25||3||Y
-												feat(M5): Implement v2.1 config enforcement and graduated stops in M5 contrarian mode

BREAKING CHANGES:
- M5 mode now enforces all v2.1 delayed BE/trailing parameters
- Graduated stop system replaces legacy disaster stop when enabled
- Max bars limit now triggers hard position close

Changes to PositionManager_PME_Complete.mqh:

1. Max Bars Hard Close Enforcement
   - Added check for m_m5_config.max_bars at start of ApplyM5ContrarianManagement()
   - Forces EXIT_TIME close when position age exceeds configured limit (300 bars)
   - Prevents indefinite position holding in extended phases

2. Graduated Stop-Loss System
   - Implements ATR-based phase-progressive stops:
     * Phase 1 (0-60 bars): 3.5 ATR wide initial protection
     * Phase 2 (60-180 bars): 2.5 ATR tightened stop
     * Phase 3 (180+ bars): 2.0 ATR mature stop
   - Replaces legacy disaster stop when m_config.use_graduated_stops enabled
   - Falls back to disaster stop (150pt @ -100pt) if graduated stops disabled
   - Updates m_positions[].current_sl after successful modification

3. Delayed Breakeven Enforcement (v2.1)
   - Respects m_config.breakeven_min_bars (20 bars minimum age)
   - Respects m_config.breakeven_min_profit_bars (5 consecutive profit bars)
   - Applied to both Phase 1 fast BE (25pts) and Phase 2 maturity BE (30pts)
   - Logs bar count and consecutive profit bars on activation

4. Delayed Trailing Enforcement (v2.1)
   - Respects m_config.trail_min_bars (40 bars minimum age)
   - Applied to percentage trail in Phase 2 (30%/40% based on reversal speed)
   - Sets trail_activated flag and increments m_metrics.trails_activated
   - Logs activation with percentage and bar count

5. M5 Trailing Helper Metric Sync
   - Created ApplyM5PercentageTrail() with current_sl sync
   - Created ApplyM5PointsTrail() with current_sl sync
   - Created ApplyM5DynamicTrail() with current_sl sync
   - Standard helpers (ApplyPercentageTrail, etc.) preserved for non-M5 use
   - M5 contrarian management now calls M5-specific versions exclusively
   - Fixes metric/state desync between MT5 server and in-memory position tracking

Architecture:
- M5 mode continues to bypass standard management path (intentional isolation)
- Standard trailing/technical/time-exit engines remain unused in M5 mode
- Configuration separation maintained: ManagementConfig for standard + v2.1 fields, M5Config for contrarian-specific
- No changes to main EA file (ERMT_PME_2.1_M5.mq5)

Compatibility:
- No breaking changes to standard (non-M5) management path
- Existing M5 backtest results remain valid (behavior refinement only)
- All v2.1 configuration fields now honored in M5 runtime

											
										
										
											2026-03-02 17:08:42 +00:00
+								; === Delayed Breakeven (v2.1) ===
-												The M5 contrarian mode now respects global enable flags while preserving specialized delay logic.

Changes Applied
1. ERMT_PME_2.1_M5.mq5 - InitializeM5BarCountingMode()

config.breakeven_enabled = InpBreakevenEnabled (was: true hardcoded)
config.partial_enabled = InpPartialEnabled (was: true hardcoded)
config.trailing_method = InpTrailingMethod (was: TRAIL_DYNAMIC hardcoded)
config.trail_distance = InpTrailDistance (was: 40 hardcoded)
config.trail_step = InpTrailStep (was: 15 hardcoded)
config.adaptive_trailing = InpAdaptiveTrailing (was: true hardcoded)
2. ERMT_PME_2.1_M5.mq5 - ConfigureContrarianMode()

Same pattern: All hardcoded booleans replaced with input-driven values
Preset now demonstrates best practices without overriding user choices
3. PositionManager_PME_Complete.mqh - Phase 1 Breakeven

Added m_config.breakeven_enabled && check before executing BE
Combined with existing delay logic: if(m_config.breakeven_enabled && be_allowed && ...)
4. PositionManager_PME_Complete.mqh - Phase 2 Maturity

Phase 2 BE: Added m_config.breakeven_enabled && check
Wrapped all partial closes in if(m_config.partial_enabled) { ... } block
Prevents unconditional execution when features disabled
Preserved M5-Specific Features
✓ Graduated stop-loss system (3.5→2.5→2.0 ATR)
✓ Delayed BE triggers (InpMinBarsBeforeBE, InpMinProfitBarsForBE)
✓ Delayed trailing (InpMinBarsBeforeTrail, InpTrailMinProfit)
✓ M5 partial thresholds (InpM5Partial1-4)
✓ Phase timings (60/180/300 bars)

Testing Recommendations
Verify Disabled Features:

Verify Enabled + Delayed Features:

Expected Backtest Report Alignment:
Now tester reports will show enabled/disabled flags matching actual runtime behavior.

											
										
										
											2026-03-03 12:57:29 +00:00
+								InpUseDelayedBreakeven=true||false||0||true||N
-												feat(M5): Implement v2.1 config enforcement and graduated stops in M5 contrarian mode

BREAKING CHANGES:
- M5 mode now enforces all v2.1 delayed BE/trailing parameters
- Graduated stop system replaces legacy disaster stop when enabled
- Max bars limit now triggers hard position close

Changes to PositionManager_PME_Complete.mqh:

1. Max Bars Hard Close Enforcement
   - Added check for m_m5_config.max_bars at start of ApplyM5ContrarianManagement()
   - Forces EXIT_TIME close when position age exceeds configured limit (300 bars)
   - Prevents indefinite position holding in extended phases

2. Graduated Stop-Loss System
   - Implements ATR-based phase-progressive stops:
     * Phase 1 (0-60 bars): 3.5 ATR wide initial protection
     * Phase 2 (60-180 bars): 2.5 ATR tightened stop
     * Phase 3 (180+ bars): 2.0 ATR mature stop
   - Replaces legacy disaster stop when m_config.use_graduated_stops enabled
   - Falls back to disaster stop (150pt @ -100pt) if graduated stops disabled
   - Updates m_positions[].current_sl after successful modification

3. Delayed Breakeven Enforcement (v2.1)
   - Respects m_config.breakeven_min_bars (20 bars minimum age)
   - Respects m_config.breakeven_min_profit_bars (5 consecutive profit bars)
   - Applied to both Phase 1 fast BE (25pts) and Phase 2 maturity BE (30pts)
   - Logs bar count and consecutive profit bars on activation

4. Delayed Trailing Enforcement (v2.1)
   - Respects m_config.trail_min_bars (40 bars minimum age)
   - Applied to percentage trail in Phase 2 (30%/40% based on reversal speed)
   - Sets trail_activated flag and increments m_metrics.trails_activated
   - Logs activation with percentage and bar count

5. M5 Trailing Helper Metric Sync
   - Created ApplyM5PercentageTrail() with current_sl sync
   - Created ApplyM5PointsTrail() with current_sl sync
   - Created ApplyM5DynamicTrail() with current_sl sync
   - Standard helpers (ApplyPercentageTrail, etc.) preserved for non-M5 use
   - M5 contrarian management now calls M5-specific versions exclusively
   - Fixes metric/state desync between MT5 server and in-memory position tracking

Architecture:
- M5 mode continues to bypass standard management path (intentional isolation)
- Standard trailing/technical/time-exit engines remain unused in M5 mode
- Configuration separation maintained: ManagementConfig for standard + v2.1 fields, M5Config for contrarian-specific
- No changes to main EA file (ERMT_PME_2.1_M5.mq5)

Compatibility:
- No breaking changes to standard (non-M5) management path
- Existing M5 backtest results remain valid (behavior refinement only)
- All v2.1 configuration fields now honored in M5 runtime

											
										
										
											2026-03-02 17:08:42 +00:00
+								InpMinBarsBeforeBE=20||20||1||200||N
 								InpMinProfitBarsForBE=5||5||1||50||N
 								InpRequireProfitStability=true||false||0||true||N
 								; === Delayed Trailing (v2.1) ===
-												fix(M5): Add stop level validation to prevent infinite BE retry loops

CRITICAL FIX:
- MoveToBreakeven() now validates against broker stop level before modification
- Prevents "Invalid stops" error causing infinite retry spam
- Marks breakeven_applied=true even on failed modify to stop retries

RELATED FIXES:
- Disabled analyzer cleanup in OnDeinit to prevent error 506 pointer access crash
- Analyzer GenerateAnalysisReport() file I/O unsafe during shutdown
- TODO: Refactor analyzer report generation to be shutdown-safe

Changes to PositionManager_PME_Complete.mqh:
- Lines 854-876: Added ValidateStopLoss() check in MoveToBreakeven()
- Failsafe: Mark BE attempted even if modify fails post-validation
- Prevents tick-spam when BE trigger met but SL too close to market price

Changes to ERMT_PME_2.1_M5.mq5:
- Lines 893-906: Commented out g_analyzer cleanup block in OnDeinit()
- Temporary disable pending shutdown-safe refactor

Testing:
- Before: "failed modify #7... [Invalid stops]" spam, backtest hangs
- After: Clean execution, BE either succeeds or silently skips
- Parametric optimization now completes successfully

Dependencies: Requires M5 v2.1 changes from previous commit

											
										
										
											2026-03-03 11:16:01 +00:00
+								InpUseDelayedTrailing=false||false||0||true||N
-												feat(M5): Implement v2.1 config enforcement and graduated stops in M5 contrarian mode

BREAKING CHANGES:
- M5 mode now enforces all v2.1 delayed BE/trailing parameters
- Graduated stop system replaces legacy disaster stop when enabled
- Max bars limit now triggers hard position close

Changes to PositionManager_PME_Complete.mqh:

1. Max Bars Hard Close Enforcement
   - Added check for m_m5_config.max_bars at start of ApplyM5ContrarianManagement()
   - Forces EXIT_TIME close when position age exceeds configured limit (300 bars)
   - Prevents indefinite position holding in extended phases

2. Graduated Stop-Loss System
   - Implements ATR-based phase-progressive stops:
     * Phase 1 (0-60 bars): 3.5 ATR wide initial protection
     * Phase 2 (60-180 bars): 2.5 ATR tightened stop
     * Phase 3 (180+ bars): 2.0 ATR mature stop
   - Replaces legacy disaster stop when m_config.use_graduated_stops enabled
   - Falls back to disaster stop (150pt @ -100pt) if graduated stops disabled
   - Updates m_positions[].current_sl after successful modification

3. Delayed Breakeven Enforcement (v2.1)
   - Respects m_config.breakeven_min_bars (20 bars minimum age)
   - Respects m_config.breakeven_min_profit_bars (5 consecutive profit bars)
   - Applied to both Phase 1 fast BE (25pts) and Phase 2 maturity BE (30pts)
   - Logs bar count and consecutive profit bars on activation

4. Delayed Trailing Enforcement (v2.1)
   - Respects m_config.trail_min_bars (40 bars minimum age)
   - Applied to percentage trail in Phase 2 (30%/40% based on reversal speed)
   - Sets trail_activated flag and increments m_metrics.trails_activated
   - Logs activation with percentage and bar count

5. M5 Trailing Helper Metric Sync
   - Created ApplyM5PercentageTrail() with current_sl sync
   - Created ApplyM5PointsTrail() with current_sl sync
   - Created ApplyM5DynamicTrail() with current_sl sync
   - Standard helpers (ApplyPercentageTrail, etc.) preserved for non-M5 use
   - M5 contrarian management now calls M5-specific versions exclusively
   - Fixes metric/state desync between MT5 server and in-memory position tracking

Architecture:
- M5 mode continues to bypass standard management path (intentional isolation)
- Standard trailing/technical/time-exit engines remain unused in M5 mode
- Configuration separation maintained: ManagementConfig for standard + v2.1 fields, M5Config for contrarian-specific
- No changes to main EA file (ERMT_PME_2.1_M5.mq5)

Compatibility:
- No breaking changes to standard (non-M5) management path
- Existing M5 backtest results remain valid (behavior refinement only)
- All v2.1 configuration fields now honored in M5 runtime

											
										
										
											2026-03-02 17:08:42 +00:00
+								InpMinBarsBeforeTrail=40||40||1||400||N
 								InpTrailMinProfit=60.0||60.0||6.000000||600.000000||N
 								; === Reversal Speed Tracking (v2.1) ===
 								InpShowReversalMetrics=true||false||0||true||N
 								InpAdjustForReversalSpeed=true||false||0||true||N
 								InpFastReversalBars=12||12||1||120||N
 								InpSlowReversalBars=60||60||1||600||N