nandigang/Warrior_EA
Watch
1
0
Fork
You've already forked Warrior_EA
 0
forked from animatedread/Warrior_EA
Code Pull requests Activity
Warrior_EA/Variables/Variables.mqh

16 lines
1.1 KiB
MQL5
Raw Permalink Normal View History

feat(nn): derive dense depth, train on all history, pin the shape in .cfg Completes the derived-topology work. Three inputs removed. AIType loses its depth suffix - AI_MLP/AI_CONV/AI_LSTM/AI_HYBRID, five entries instead of eight. Depth is now derived from the two endpoints the taper already has to connect (derived first-layer width, output-tied final width) at a 2x per-layer compression target, clamped [2..5]. Asking a user to pick a layer count while the code derives the widths those layers taper between was asking for half a decision: at 64 units tapering to 12, four layers compress by 1.4x per step and five by 1.3x, so the extra depth bought no abstraction. On the shipping H1/10y default the derivation lands on 3 layers - the depth that actually won Run 2. StudyPeriods removed. There is no case for training on less data than the broker provides at a ~6% directional base rate; the honest generalization read comes from the OOS holdout, not from withholding history. Training now starts at the earliest available bar, floored by MinTrainYear, which answers a different question (excluding dubious pre-history) and stays. That required closing the hazard the old code documented: the capacity budget now MEASURES the symbol's real bar count, and a topology derived from a measurement would widen as history downloads. Both ends are now pinned. Every derived value left the weights-filename fingerprint - keying a filename on a measured quantity means the EA looks for a file that does not exist, starts from era 0 and orphans a trained model, silently, because a missing cache is the normal first-run state. The shape lives in the .cfg instead, where LoadAndCompare now ADOPTS the four derived fields rather than diffing them; a mismatch there would discard a fully-trained model over nothing the user did. Two fields appended to the .cfg for the conv/LSTM stages, length-guarded on read because FileReadInteger past EOF returns 0 with no error. ForceHiddenLayers, a compile-time constant like DebuggingMode, pins depth for diagnostic comparisons. It joins the fingerprint only when non-zero, so forced depths get their own files - sequential comparisons only, not simultaneous from one .ex5. Derived shape, H1/10y defaults (21 features x 20 bars): first layer 64, 3 dense, 8 conv filters, 16 LSTM units. The LSTM block halves from ~58k to ~28k weights. Both builds compile 0 errors, 0 warnings. Re-keys existing models. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
2026-07-30 10:05:40 -04:00
//+------------------------------------------------------------------+
convert
2025-05-30 16:35:54 +02:00
//| Warrior_EA |
//| AnimateDread |
//| |
//+------------------------------------------------------------------+
string eaName = "Warrior_EA";
string tableschema = "year INTEGER, month INTEGER, day INTEGER, dayOfWeek INTEGER, hour INTEGER, minutes INTEGER, pattern STRING, direction STRING, entryPrice DOUBLE, exitPrice DOUBLE, result STRING";
bool IsBacktesting = false;
refactor(inputs): 96 -> 70 inputs; remove two untested/unusable filter modules Every removal below is FINGERPRINT-NEUTRAL by construction: each retired input is pinned to the exact value it already shipped with, so running models keep their filenames and resume rather than restarting at era 0. Verified field by field against BuildConfigFingerprint. Removed as inputs, kept as pinned constants (the value was never a preference the user had a basis to change): - OutputNeuronsCount. The regression head predicts a continuous quantity the triple-barrier label does not contain; the target is an EVENT, so the right output is its probability. The regression code paths stay implemented and dormant - they cost nothing and removing them would touch every scoring path at once. - MinRecall. A safety floor, not a preference, and the only direction a user can move it is the harmful one: raising it past what the config reaches yields NO model, not a better one (observed repeatedly at 60). - SwingConfirmationBars. Stopped gating the labels with the relabel, but is STILL load-bearing for the swing-context input features - it is the ZigZag repainting embargo, and without it those 9 features read a leg the live bar could not have had yet. Pinned, not deleted. - MaxErasPerRun (runaway backstop, never reached in a healthy run), FreezePriorCalibration (unanswerable by a user; near-balanced labels make the priors stable anyway), VerboseMode (developer view, joins DebuggingMode), MACD/Ichimoku periods x6 (both indicators ship disabled, and as optimizer dimensions they are pure overfitting surface - the AI auto-tuner is the supported way to move them). - SignalClusterWindow -> 3, no longer an input. Barrier labels make consecutive setups real, which argued for 0; it is not 0 because on D1+ a 6-bar window spans over a week and two arrows a day apart on a weekly-scale move are one event. 3 splits it correctly by timeframe. - EnableOnlineLearning -> ON. Adapting to a changing market is what keeps a months-attached model from going stale, and the rolling-accuracy freeze is what makes it safe. See the caveat noted in the handoff: it had not been forward-tested on a live feed when this became default. Removed entirely: - Intraday Time Filter (5 inputs + Signals/SignalITF.mqh). Two of its five inputs were raw BITMASKS, which is an implementation detail exposed as a control. The job is covered three times over by things that are declarative or that learn: the session filter, the time-of-day/day-of-week input features (the network discovers which hours are good rather than being told), and the journal's time buckets. - Market Depth Filter (5 inputs + Signals/SignalMarketDepth.mqh, plus its OnInit probe and OnDeinit release). It needs real level-2 data that this broker - and most retail MT5 brokers - do not provide, so the module has never once executed against real data. Shipping four tuning dropdowns for an untested path is worse than shipping nothing: the only users who could enable it would be its first-ever testers, live. If DOM returns it should be a FEATURE fed to the network, not a rule-based veto with hand-tuned thresholds - imbalance is data. - IndicatorTuneTrials, replaced by ComputeTuneTrialBudget(). The useful budget depends on how many parameters are actually being searched, which depends on which features are enabled - so one number meant wildly different things run to run. The shipped 32 was ~10 candidates per dimension against one enabled indicator (wasteful: each costs GA_SEEDS full training runs) and under one per dimension against all nine (blind). Now population ~ 4 x active dimensions, clamped [8,64], with CADIndicatorTuner::ActiveDimensions() defined immediately above PerturbRandom() so the two cannot drift apart. - Six orphaned enums (TUNE_TRIALS_PRESET, DOM_*, ENTRY_HOUR_OF_DAY, TIME_FILTER_DAY_OF_WEEK), 81 lines. Other UX: - SL_ATR_x1 / TP_ATR_x3 now carry the "(classic)" default marker every other preset enum in the file already used. Nothing in the SL/TP dropdowns previously told a user which pair was the shipped default - which matters far more since the relabel, because those two define the labels and changing either forces a retrain. - Neural Network section moved directly ABOVE AI Input Features: choose the architecture, then choose what it sees. NN Optimizer / Performance stays last - the Adam/Sgd inputs are declared in AI/Network.mqh and render immediately after that divider. - News feature + window moved to the end of the AI feature list, below Wyckoff Bar Inversion. - Dropped "(0-100)" from Min vote to open - it is an enum, not a number. Both builds compile 0 errors / 0 warnings. No retrain forced. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
2026-07-31 21:22:02 -04:00
//--- EnableSessionFilter/EnableNewsFilter/EnableRiskGuard are real inputs (Variables\Inputs.mqh),
//--- consistent with every other filter's on/off toggle. EnableITF and EnableMarketDepth are gone -
//--- both modules were removed 2026-08-01, see the removal notes in that file.
feat(nn): derive dense depth, train on all history, pin the shape in .cfg Completes the derived-topology work. Three inputs removed. AIType loses its depth suffix - AI_MLP/AI_CONV/AI_LSTM/AI_HYBRID, five entries instead of eight. Depth is now derived from the two endpoints the taper already has to connect (derived first-layer width, output-tied final width) at a 2x per-layer compression target, clamped [2..5]. Asking a user to pick a layer count while the code derives the widths those layers taper between was asking for half a decision: at 64 units tapering to 12, four layers compress by 1.4x per step and five by 1.3x, so the extra depth bought no abstraction. On the shipping H1/10y default the derivation lands on 3 layers - the depth that actually won Run 2. StudyPeriods removed. There is no case for training on less data than the broker provides at a ~6% directional base rate; the honest generalization read comes from the OOS holdout, not from withholding history. Training now starts at the earliest available bar, floored by MinTrainYear, which answers a different question (excluding dubious pre-history) and stays. That required closing the hazard the old code documented: the capacity budget now MEASURES the symbol's real bar count, and a topology derived from a measurement would widen as history downloads. Both ends are now pinned. Every derived value left the weights-filename fingerprint - keying a filename on a measured quantity means the EA looks for a file that does not exist, starts from era 0 and orphans a trained model, silently, because a missing cache is the normal first-run state. The shape lives in the .cfg instead, where LoadAndCompare now ADOPTS the four derived fields rather than diffing them; a mismatch there would discard a fully-trained model over nothing the user did. Two fields appended to the .cfg for the conv/LSTM stages, length-guarded on read because FileReadInteger past EOF returns 0 with no error. ForceHiddenLayers, a compile-time constant like DebuggingMode, pins depth for diagnostic comparisons. It joins the fingerprint only when non-zero, so forced depths get their own files - sequential comparisons only, not simultaneous from one .ex5. Derived shape, H1/10y defaults (21 features x 20 bars): first layer 64, 3 dense, 8 conv filters, 16 LSTM units. The LSTM block halves from ~58k to ~28k weights. Both builds compile 0 errors, 0 warnings. Re-keys existing models. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
2026-07-30 10:05:40 -04:00
bool EnablePAI = (AIType == AI_MLP);
bool EnableCONV = (AIType == AI_CONV);
bool EnableLSTM = (AIType == AI_LSTM);
bool EnableHYBRID = (AIType == AI_HYBRID);
convert
2025-05-30 16:35:54 +02:00
//+------------------------------------------------------------------+
Copy permalink